- Posts: 27
- Thank you received: 29
Question
Filliers Dry Gin 28 logo
- vdh43
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
29 Jan 2018 18:12 - 29 Jan 2018 18:14 #52370
by vdh43
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
Filliers Dry Gin 28 logo was created by vdh43
My first attempt with V-carving : a logo of my favorite gin : Filliers Dry Gin 28... imho : a nice, stylish logo, carved in mdf 3,4mm hardboard with white coating...
Very long job, due to the low speed of my settings (due to an imperfect assembly of my stepcraft), but thankfully, i discoverd the 'run from here' setting in my uccnc, so i can spread a job over several evenings...
Executed with a 1.5mm 45° v carving bit...
Now i understand the sense of a bigger clearance bit....
This image is hidden for guests.
Very long job, due to the low speed of my settings (due to an imperfect assembly of my stepcraft), but thankfully, i discoverd the 'run from here' setting in my uccnc, so i can spread a job over several evenings...
Executed with a 1.5mm 45° v carving bit...
Now i understand the sense of a bigger clearance bit....
This image is hidden for guests.
Please log in or register to see it.
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
Last edit: 29 Jan 2018 18:14 by vdh43.
The following user(s) said Thank You: Harm, Doug, FrankTi
Please Log in or Create an account to join the conversation.
- angel_xt
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 8
- Thank you received: 5
30 Jan 2018 22:48 #52405
by angel_xt
Replied by angel_xt on topic Filliers Dry Gin 28 logo
nice job !
Please Log in or Create an account to join the conversation.
- Doug
-
- Offline
- Forum Nutzer
-
31 Jan 2018 18:30 #52440
by Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), dsgb.net
Replied by Doug on topic Filliers Dry Gin 28 logo
That looks beautiful. Very nice. How long did it take?
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), dsgb.net
Please Log in or Create an account to join the conversation.
- vdh43
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 27
- Thank you received: 29
31 Jan 2018 20:07 #52445
by vdh43
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
Replied by vdh43 on topic Filliers Dry Gin 28 logo
about 4 hours, due to the low velocity my configuration is working at.
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
Please Log in or Create an account to join the conversation.
- hoedur
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 810
- Thank you received: 1138
13 Mar 2018 08:39 #53234
by hoedur
Wenn du heute nur das tust - was du gestern schon getan hast - dann bleibst du auch morgen nur da - wo du heute schon bist
Rüdiger
☺☺☺ Lass mal späne produzieren!!! ☺☺☺
Pro Vario 10-05 D200 / Estlcam / WinPcNc USB / Kress 800
vorher: 600er / Estlcam / Mach3 UC100 mit USB...
Replied by hoedur on topic Filliers Dry Gin 28 logo
Welk materiaal heb je genomen?
Wenn du heute nur das tust - was du gestern schon getan hast - dann bleibst du auch morgen nur da - wo du heute schon bist
Rüdiger
☺☺☺ Lass mal späne produzieren!!! ☺☺☺
Pro Vario 10-05 D200 / Estlcam / WinPcNc USB / Kress 800
vorher: 600er / Estlcam / Mach3 UC100 mit USB...
Please Log in or Create an account to join the conversation.
- vdh43
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 27
- Thank you received: 29
13 Mar 2018 20:01 #53244
by vdh43
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
Replied by vdh43 on topic Filliers Dry Gin 28 logo
wit gelakte MDF hardboard van 3 mm (standaard te koop in Hubo / Gamma)
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
The following user(s) said Thank You: hoedur
Please Log in or Create an account to join the conversation.