I've bought and assembled the M1000 with tool magazine (
shop.stepcraft-systems.com/Tool-Magazine-M1000-incl-pneumatic-lifting-function
) and the automatic tool changer (
shop.stepcraft-systems.com/automatic-tool-changer-kress
), but I can't get it to work properly.
I'm setting the switch of the tool changer to "O", which means that the tool magazine and exhaust are activated.
Then I'm starting the spindle from UCCNC, releases the metal connector. So I know the pneumatics of the metal connector is working.
Then I stop the spindle again and click the button to release the mollete:
But nothing happens! I hear no sounds coming from the pneumatics whatsoever!
I've released the tool magazine again and I can see underneath that the red lamp for the metal connector is turning on and off when I turn the spindle on and off, but the red lamp for the tool changer is never turning on:
Also, one of my LED indicator lamps is orange/yellow (see attachment):
I'm not sure what that means?
I've followed the instructions and double-checked all the connections, but and everything seems to be in order.
Do you have a guess as to what might be wrong?