- Beiträge: 1
- Dank erhalten: 8
Frage
Fairly complex shape using free software
19 Feb 2016 18:53 #30845
von MarkLeeds2K5
Dieser Beitrag enthält Bilddateien.
Fairly complex shape using free software wurde erstellt von MarkLeeds2K5
This was a little test to see what I could do without buying any software.
The shape was designed in Inkscape, converted to a 3D model in Blender, toolpaths created in Fusion 360, GCODE sent using Universal GCODE Sender, and stepcraft controlled by an arduino running GRBL. That's all free (except the arduino which was about £
.
It's only a bit of MDF, but I'm pretty pleased with the result.
Took about 1 hour 15 minutes to make.
The shape was designed in Inkscape, converted to a 3D model in Blender, toolpaths created in Fusion 360, GCODE sent using Universal GCODE Sender, and stepcraft controlled by an arduino running GRBL. That's all free (except the arduino which was about £
.It's only a bit of MDF, but I'm pretty pleased with the result.
Took about 1 hour 15 minutes to make.
Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
25 Mär 2016 19:26 - 25 Mär 2016 19:26 #32488
von julius
SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
julius antwortete auf Fairly complex shape using free software
I don't know what is it but... nice! 
Nothing is like the satisfaction after your work is done.
Nothing is like the satisfaction after your work is done.
SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
Bitte Anmelden oder Registrieren um der Konversation beizutreten.