AFAIK, 2.8A per driver, but to squeeze that much out of it, you'd probably need a power supply with a few more amperes. Don't be disappointed with...

I'm still waiting for news. I don't have a date yet. peterg1000, could be, but it makes it quite sensitive do get the "proper adjustment". While i...

Oh ok, I don't know much about the SC1. I would guess between the steel screws and the brass nut, if anything wears out, it would be the nut, no? If s...

Nema 23 seems like an argument for different drivers all together. With the current output of the stepcraft control units being limited to 1.4A or 1.8...

Routing the lines for the parallel port and a driver in that space, not sure that's a good idea, and like you said, WinPC users would be out of luck. ...

Definitely not. The driver is already under some strain just driving one motor. My board was brown under the Y axis motor from the heat. The driver is...

Answer is no. The good news is that since I published my mod, Stepcraft got in touch and they will release an upgrade pack with a new control unit and...

I'm in the process of trying to convert my SC2/840 to dual Y stepper motors. I have designed a new controller with an extra driver for the second Y ax...

I make pickguards for guitars often and the stepcraft produces very professional results. My advice would be to use single fluted milling bits and don...