Testing nearing completion. released soon - keep you posted.

UCCNC has windows WSQL driver certs for the USB module. So it works on windows with XP 7 8 8.1 10 wiht USB 2.0. That basically means (stand to be corr...

make sure the switch is engaging when the Z axis moves to the left and presses the X axis switch. Also make sure the motor is not stalling very clo...

A correctly tuned STEPCRAFT machine with a UC100 USB controller will not loose steps like you have seen. the LPT control or mechanical tuning is th...

If there is no blue light then the USB module has not been recognised. check top of UCCNC screen. Top left hand corner it will say "UCCNC running in d...

Picture looks like belt has been overloaded and has failed between teeth. If the belt is too tight this will happen.

Solid state relays can fail on... Best not to use them. Typically - the charge pump relay contacts (NO and then closed when charge pump is active a...

Not as easy as its all integrated. Ideally - the chargepump can be used to disable drive power and also the spindle. But as the drives are all int...

If your using a DC motor from ebay running on a PWM power supply then that is one cause of noise. The motors are okay - the controllers are really rea...

You have the wrong license key - where did you get your UC100?

Charge pump circuit acts like a failsafe - it needs to see 12.5kHz (usually) and it will enable a signal or relay. This only works then if the softwar...

Super! now you can crack on cutting 🙂 Well done... This information will be interesting for others for sure. Thanks for posting the results.

If it wont run and its not latest updated version with flash player then it must be the .net framework. We've yet to see a computer (300+) where it w...

See here probably a stupid question - I assume you have read the UCCNC users manual software pre-requirements for windows 8/10. Page 4 - .net ...

For sure - it should work. unless it is related to the latest issue with flash from adobe. There is a bug in the flash player that causes applicat...