Will have answer for this soon. You have to configure the probe feature. do you have sensor?

An absolute must!!! SC is potentially lethal! make sure no small-young fingers can get near it either. I've milled my finger with a 2mm ca...

Jerky movement on Y axis? Make sure the two portal towers are the same distance from the back of machine - and the pulleys are working together and ar...

All limits pop same pin on SC - its the way its wired. The reason there is X++ and X-- and X home - is that on some machines - there are three individ...

jeyb - talk to us about your parameters for Aluminium? Aluminium is difficult to cut. Talk us through how you approached the cutting? Clamping, ...

🙂

Very cool - did you cut with small cutter from one piece? 1mm? very cool work! well done.

Super advanced stuff here for a STEPCRAFT!! not simple 2D any more. Great stuff - really really really impressive. How long did you take? and 3mill ba...

Thank you WonSTEP for your detailed response. It is indeed about learning. I started in CNC with a machine that was off the shelf and worked from the ...

Think you guys both emailed us.. let us know you get on okay.

When milling - its best to ramp plunge. So you don't go straight down in Z. For example when milling Aluminium on larger machines its best to ramp / h...

We will post more. this part had just one direction for finish pass. We can make one with multiple passes on different directions to get best fini...

post your results - hopefully not broken bits!

They are bits left over from the brass manufacturing. They serve no purpose. Backlash is movement/play in the drive system as the motor changes di...

You can get a PWM signal from the output for the 3D printer / HF spindle. This is how the speed and fan strength is controlled. you do not need to spl...