Nice work 🙂

It will be very interesting to see the power requirements for different materials. Looking forward to seeing these tests. thank you! this project ...

lovely work. looking at how it has been clamped vibration most likely came from the work. You should get a piece of MDF or other to go under as the sa...

The results are heavily dependant on your machine setup and on the speed you machine at. It also depends on the rapid feed rates. Stepper motor tor...

see here You need the LPT card and then a UC100 to talk to Mach3 / UCCNC. you also need the installation files. can send us an email if you wan...

Coming soon....!

If the system works - don't be in a rush for updates - unless there is a need for extra functionality release. updates can make things worse rathe...

Extraction very important. keep small particles out. Google "Dust deputy".. really nice system that turns your shop vac into a cyclone system. thi...

looks very comprehensive and interesting test. let us know how you get on. lets see some chips flying.

yes correct - you have it. Well done. Steps... Speed... acceleration. Z axis is slow on purpose to stop accidental cutter breaks 🙂 Remem...

Good work!

Your working your STEPCRAFT hard dude! Nice work.

6.5mm in dremel 🙂 Surely not! 🙂

I see - so cut the paper from one - and then stick to pre cut pieces. Lots of time.. laser cutter cutting width is small? could get away with t...

You need a bigger CNC... 6 milli ballnose... done in 15 🙂