If the shimmed part is too thin then when the roller assembly is tightened the roller will not move. You can try to use a different shim in a differen...

The full WinPC software is a Gcode interpreter. You will need to generate toolpaths to use this. The toolpath generator is where you will get the "too...

I'll work on this for you guys when I get a chance.

Plus a dxf to G-Code converter. There are a lot out there and then you should be ready to go. Just start slow and gain experience. This is th...

Hey julius, well the PCB inside the SC is not only a driver board. But it is not a real CNC controller board either. Technical English terms can s...

WinPC is a CNC controller. A CNC controller needs some method of generating signals. It cannot just be software. The software crunches the numbers ...

Treat it as three stages - try to understand each stage CAD - where the Geometry is created - solid works - autocad - Alibre - Corel Draw - ...

No question is a stupid question. Yes - he does super nice work there in the Aluminium - but the process has to perfect. He uses some coolant to ...

CAM interprets Geometry (STL / DXF) and generates Gcodes (usually). At this stage its - Geometry in - Gcode out. The Gcode contains the details of the...

Cutting deep is difficult. Even on our professional routers up to 7-8,000 euro cutting 50mm deep is a challenge. We did this recently for a guy cuttin...

Yes - best thing to do is get a list of all the translations needed and we work from there.

Looks great! Nice finish. this really is the top end of what the proxxon/dremel can achieve. the HF spindle (or other) with larger cutters can all...

Yes - its possible and depends on the screen set file - the images and text settings can be changed. One of the screen sets has the text in the fl...

Do you use it? Can you give us some feedback on how you find this software?

Deadly!