Rory, Those videos are excellent, and will hopefully lay to rest problems with Y axis lockups for good and all. One minor point though - I had t...

Welcome "Roadking", The suites of modern software really make the programming of a router like the Stepcraft very straightforward. You don't need t...

I notice that only the easy two screws are replaced on the stepper - the other two are really awkward b*********s!! :angry:

Hi Mark, One comment you made has worried me - "However, after the cuts are made, GoTo Zero goes to the correct location." If that is really tr...

Hi Mika, Glad you've probably found the problem. Don't envy you having to unwire the gantry to find the culprit. Good luck! Peter.

Hi Mikath, It looks very much as though only one of the two stepper coils is being driven. Three possibilities for this situstion :- 1) Fracture...

Hi Doug, Impressive work - you must be well pleased. Question, did you get your carbide bits from Eternal ? Your VFD spindle has done you pro...

Frank, Why not assemble the Z-axis with the bottom bearing temporarily removed - this way you will be removing the effects of possible misalignment...

Godinel, I would suggest you double check all the points I mentioned in my earlier post #41792 on 03/01/17. Peter.

Hi, I can thoroughly recommend Cut2D - does everything I want from a 2D package and is very quick and easy to learn. Files will run directly in UC...

Doug wrote: In my case, I will simply ensure that no high current demand consumers are turned on while I am running a toolpath. In other words "Se...

Hi, If I may, let me set the record straight on limit switch operation. All three switches are wired in series through normally closed contacts,...

Myself, I have several times been a recipient of the "Pour more wine" order for aid to those who have dropped clangers!! B) Cheers!!