Hi! I contacted Stepcraft by phone and they told me that all model Version 2 support the bigger Kress 1050 router. I have a V2/300 and I do not see pr...

Cool! I am in Belgium, not that far 🙂 BTW I made a cooling system with the nozzle linked below and a strong aquarium pump capable of 70 L/min tha...

Thanks! With methylated spirit do you mean denatured alcohol right? WHen you said "only disadvantage you can't go away from the milling process." do ...

Thanks for the tip, I will have a look to it. I read about the chips removal. I am making a air cooling system for remove the chips and in case I have...

I have the second generation Stepcraft machine. It is Stepcraft 2 / 300. Do you also mill aluminium with it? IF yes which setting do you use? Because...

Hi! At the end I asked to Stepcraft directly. All the routers listed above are fine. I went with the Kress 1050 fme-1 for the higher torque at lower r...

Guys, I have tried to reverse the X and Y axis but the text is always mirrored. I think the easy solution is that someone with a Stepcraft and use Ma...

No problem, and thank you for the help. I asked the previous owner and he said that he was using to mirrored the model before running it. So I guess t...

Hi, thanks for reply. I also think is a X axis problem. In home and limits I tried to reverse but my X axis move correct from the ho switch (top left ...