Considered this closed. Fresh morning and I tried again, this time with more pressure on the screws (more than I was comfortable doing last night, an...

Make all of the probes (tool length, 3D, and laser) work with the same logic. Laser won't work with a hard wired in tool length probe. The first two...

Ben, I ran into some of the same issues, but now have a functioning laser. Yes, I too got bit by the switch box snafu. Shipping a switch box purc...

UPDATE: Removing the switch box fixed everything. Probe now works correctly as does the laser. Just the positioning LED not working, which is a min...

Did some more testing while awaiting to hear from Stepcraft about the DL445's compatibility with the System Attachment Switch Box. I removed the S2/6...

If Hugo is reading this forum, maybe he can enlighten us. He represents Stepcraft in Mexico and has all the "goodies" on his machine and has posted m...

I think you may be mistaken. The switch box has "Laser" labeled on it. I doubt Stepcraft would do this if this was the case. Also, why would Stepcr...

I posted this same question to the cncdrive forum (the makers of UCCNC) and someone pointed out that there was a bug in at least one version of the 3D...