I tried cutting hard wood at 3mm depth and my Z axis lost a lot of steps. Definitely not trying that depth again. ... Sorry but that doesn`t make mu...

I work With SC 840 original setting and im able to cut hard wood (Buche) With 8 mm tool f30 s20000 4mm deep full cut. But AS well AS With a car W...

I tested mine and I get +-0.5 mm (1mm total) along the Y axis. What I see is you can't depend on really exact Z jobs with this machine.

I get quite a bit of flex in the table towards the end of machine (in the Z) and wondered if fitting a heavier spoil board would help prevent this. ...

Very good! Does it help to stiffen the table? What do you mean?

Try contacting the stepcraft team by email: [email protected]

cnc-step are crappy machines!!!!! If you need a serious alu mold milling machines look for BZT, Datron, Flexicam or alike. Yeah, a volkswagen is...

Oh good, too bad we have to rely on these type of fixes to make it work. Other solution would be cutting the lower metal border with a grinder so i...

Yep, I had the same problem and the motor stopped because of it!!! My solution was to file the borders a bit and attach some elastics between the h...

I like it! :woohoo: What is the thickness of the acrylic glass and the slot size for it? It's 4.3mm thick or so, definitely not 4mm. The slot...

The finished product (it works!). Sorry for the bad quality.

The problem? I forgot to "mirror" the sides :angry: 🙁 I'm certain that wasn't a mistake - that was just part of the plan! 😉 Solution: Mirror...