I'm still waiting for the spray activator that I've ordered by post. Nevertheless, I made some experiments without it. My main concern was about AB...

P.S: to remove a professional 3M double side tape I saw people so desperate to put the piece in the oven to detach that sticky thing. :S

Too much work for an easy task IMHO. jvalencia, it depends on your particular needs. For example I have to mill special antireflex lexan (a very r...

About the first video I posted: if you have no patience then jump to minute 7:00 B)

The stuff they overcoat car body paint is also referred to as lacquer. Very hard wearing and will stick to anodised surfaces if the surface is degrea...

Thanks for the idea Joules. Any suggestion about what (cheap) sprayed product I could use? As I know it is not easy for a paint to adhere on an alumi...

But... the stopper is blocked just from the machine wall on the other side? I mean... the combination in the photo above, from approx. left to right,...

the stoppers are only a part of the whole thing .. there is a aluminum bar which has a "step" that actually holds the workpiece. This step has been mi...

MagIO2, how is fixed your stopper to the table? How you measure/evaluate if (and how much) the vise is parallel to the Y-axis or not?

I've created a little helper that allows me to attach the vice to the T-slot table very exact. You can see my setup here WOW! That's what I call a d...

To be more clear, here below the first two steps of my method (the one I don't like so much):

I don't know what is it but... nice! 🙂 Nothing is like the satisfaction after your work is done.