Last seen: Mrz 23, 2021
Hello Volker, thanks for your tips. I already know how to check a surface for linearity/flatness, since I was trained to that when I was young at th...
aber bei einem Wiederholungsabstand von 54,5mm entspäche das einem Rollendurchmesser von ca. 17mm. Das könnte hinkommen... 17 mm X 3.14 = 53,38 mm ...
Could a very slightly bent leadscrew cause this - might be worth checking with a dial gauge? To check that I should unmount all the stuff... (oh, no...
Hello Rory, yes (actually "drop"). Precision start from +/-0,03 in the center of the X-axis down to -0.1 mm at the left/right end. To be more preci...
guckst Du - auch - hier Der ATTIX 30-21 PCscheint super: Geräuschentwicklung: 59 dB Leistung: 1.500 Watt Geräuschpegel: sehr leise Ich kenne...
What do you think about PTFE Grease? PTFE Grease. I love Teflon, but I never tried it on the Steppie. The main problem are the adhesive properties...
Anleitungen sagen Öl auf die spindeln, aber ich bin sehr sher skeptisch. Du solls ein öl mit sehr sehr stärke Klebeeigenschaften finden. Ich benuz...
Weihnachten ist da! Neuer Verkaufpreis: 1.049,- Euro.
The original Stepcraft leadscrews are made from Eichenberg, so the quality should be not an issue in this case. But I agree with you: we need a volun...
The new nut with adjustable pre-load seems like the best solution. You missed the point here: the new nuts are not available for old SC1 steppies. Th...