UCCNC i think needs .NET 2.0 framework to work download the the latest version of it and try that.

are there any large electrical items coming on/off during use of your machine in the same AC connection line? This was the issue i had turning...

Are these your designs or are they downloadable. Looking at making one myself in the near future.

Did you cut some of the parts with the stepcraft.

I would inspect the drive pulleys to see if there is any free play and inspect the drive pullys themselves if there is any sort of wobble in them when...

Thanks got it sorted. problem for me now i want to remove large area of material that also has sharp corners, i was going to use the tip of a vbit wit...

Im cutting 1050alu here which i believe is 99% pure aluminium and is soft for machining. It turned out good using lots of WD40 and two flute endmill.

I have a plywood sloping base that you can take out for easier cleaning its not in the image though. The roof is fine for rain and is held on by velc...

Looks good for thick short material, but i can see thin material flexing and vibrating when not full supported in the middle.

I use the Kress 800 and I don't have problems with my Z axis. May be your rollers are too tight? I never heard of that brass screw friction thing. ...

I´m happy that it worked out for you too. /Mika Mika... you miss read, Ive tried adjusting the screws but makes no difference as i think the 1.7...

Ive adjusted the rollers with the 2 screws loosening them and tightening them and cant find something that works. I see you have the HF spindle, th...