Sounds like you are not setting up your origin in fusion360 cam correctly before making operation. If you read your g code, and see numbers that are o...

You posted this twice ! :cheer:

Oh yes, and it ROCKS !

I have attached the Post Processor - for Fusion 360 Stepcraft when using UCCNC, with the default Rotation axis, setup to be parallel with the machine...

Fixed, The arc error, appears to come from the Tollerance set in the Pass settings menu. It was set to 0.01mm, and I cahnged it to 0.02mm, and ...

Ditto - this weekend some time. I had errors particularly doing large circular bores, or 3d sculpting....

Here is my request post on the Autocad CAM post request page. Someone has posted a UCCNC post processor to try with fusion 360 to see if it works b...

Hey guys, I am having exactly the same problem trying to do a 3d profile around bored holes. Has anyone had any success with Fusion mach3 and ...

Now I'm wondering a little more, the Y axis has the heaviest load on the entire machine by design, cutting along the X axis would be far more Rigid, a...

REVISED RESULTS - MORE DATA 6mm end mill Carbide 4 flute upcut. 3,000 RPM 150mm/min 0.1mm Depth Ok Cut silent 5,000 RPM 150mm/min 0.2mm Depth Ok ...

Hi, So I did some basic testing on unknown aluminium, starting with varying RPM, then cut depth, and havn't gotten to varying feed rates, but that...