Welcome to the forum. What is your setup (machine, software, etc.) Make sure you give the necessary information when asking a question. have fu...

vdh43, If you want a small spindle for "light" milling I suggest to buy the Proxxon IBS/E this cost around € 75,00 and is much more quiet than a dr...

Nice effort 🙂 But I see you have a multiplex adapter ring made for your Dremel. If you like to made some precision projects in the future I sugge...

Ok Hassa, I assumed that you have the full version of WinPC-NC USB but there are two versions of it the older 2.5 and newest 3.0 But the interface ...

Hello Hassa, First of all witch version of WinPC-USB do you use? I assume you setup your work piece sizes and origin in VCarve-pro. Then genera...

deOs, Endmills are not designed for drilling, but it might work if you use enough stepd to peck and get a good chip waste clearance. Another way i...

make sure you have two toolnumbers in the file. eq. path one toolnr 1, path two toolnr 2 and save both paths to one file that should work

Rose, Two sited machining can be done at various ways but here you have a link to Aspire tutorials. You can use this method for your program or ...

Ivan, have you checked if all set nuts on the axis are tight, at mine machine these started to loosen after 50/60 hr of milling. This resulted in...

Hello all, did I missed something are we changing to German instead of English language?

Randy, Frustration is not the right mood for asking advice, but I understand it. Your problems seems to be related to lose connection between th...

I am new to the CNC world, so this may sound like a stupid questions, so please excuse me. You attached the files for the very nice hose holder, but ...

Herrian, I use the SC420/1 and the SWS1200 unit first with the Proxxon but now I changed to the Kress. So first change the toolholder to the ver...

what software you are using? And what kind of computer, PC or Laptop? Mac or Windows? Don't let us guess

Hassa, WinPC-Nc is as good as UCCNC it all depends on what you expect to get. WinPC that comes with the machine is the light version and that on...