Last seen: Sep 9, 2024
I use a FME 1050 myself on a SC 1/420 and the machine can cope with it. Just be gentle with the feed speed and cutting depth, don't overstrech the st...
denatured alcohol I don't know if it is the same. I use burning alcohol in the Netherlands its name is "brandspiritus" Its methyl alcohol and is flam...
Tommy, Than you have received the second generation. if it is type 2/420 your ok. the machine mounting plate is 10mm thick the first has a 8mm thi...
For aluminium use methylated spirit its cheap and will do the job. just apply some on the surface or spray using an airbrush like I do, only disadva...
The kress 1050 fme canas slow as 5000 rpm. I need this low speed for acrillic and plastics. for aluminium a shoose a speed between 8000 ans 12000 ...
Lissoni, If you mainly cut aluminium than speed control of the spindle is paramount. I use a Kress 1050 fme/p just because of that. Yes it's a ...
Hello Tommy, I know that UCCNC is hot now, but did you consider WINPC-NC USB version? This progam is registred to your Stepcraft machine (unique b...
Yes you can adjust your Z-axis software limit, but than you have tell to us (the forum members) what software you are using. Is it WinPC-NC or UCCNC....
Hello hassage, If you just want to drill holes especially small ones than don't use endmills. Preferably use drillbits like these : for very...
Hello DrCat, The first question you have yo ask yourself is what will I do with this machine? Do I use it for hobby?; Semi-professional builds?; ...
great, have fun with your steppie
Ok I mean tab "parameters" in mine translation it is setting that why.
Hi again, Open WinPC and go to tab settings go to the last item on the submenu "open". This opens your explorer in the folder of winpc, here you c...
Hi Yoelba, Did you loaded the correct machine type profile in WinPC-NC. This is option menu when you for the first time start WinPC.