Flyant, I fully agree with Reiner St. Spend a few euro's to upgrade from WinPC v 2.5 to version 3.0 and you will see that it is as good as any oth...

First give some information! In what program do you design your letters and in what program do you create your Toolpaths? What driving software is u...

Hello Yorgo, I think I can help you out. Send a private email to me in Dutch.

Hello Viken, I try to explain, "What are the differences between the different names? its not very clear (FME-P or FME-1-DI)" Both are Kress ...

Gilbert, I suggest that you visit the site of Lewetz Burkhard and download the newest version of winpc 3. In the new version the toollength s...

Gilbert, to answer your first question, - on the tab basic settings and sub-tab sensor. But, you leave us assuming over the type and brand of y...

Allesandro, Iam glad that it helped you. Hope you will have lots of pleasure with your machine, but remember you have a semi professional kress sp...

Allesandro, you bought a serie 1 stepcraft. your 600 has a toolholder plate witch is 10mm thick and a little shorter than the version 2 plate. So...

Herriman, The switch SWS1200 should work with the Kress. I use the same configuration and that works fine. Try to connect the proxxon again to ...

Craig, The tool sensor works with shortcut the circuit. So two wires lets say 1 minus (-) and 1 plus (+) when the two get connected the sensor is ...

Hallo Ofthewell, I assume your Dutch? You can send me a private message by mail and I willl answer you in dutch, if you want that. waiting t...

Hello Aero, I think you made the right decission. I once had to make the same choice and I choose for the original Prusa I3 Mk3 printer as a kit ...

Hello aero, To begin with your first question "About the work area, is the same for printing than for cutting, milling, and so on, right?" Yes y...

Eddie, It sems like a problem in the G-code (commands missing to turn laser off). You can try to mail to Burkhard Lewets He is the author of WinPC...