Did you check your crash-stop button. could accidentally been triggered?

Oh yeah, sorry wrong nr. They provide paper and epoxy, just look carefully if there is a K= for paper or E for epoxy in the nr. another one witch i ...

The last one's I bought are from Conrad ans they where from the brand Proma EPOXYD FR4 and if you don't have a vacuum table try double sided tape f...

Hello scrombo, WinPC-NC has no auto-level function, but why do you want that? A PCB plate is as flat as it is produced. If you flatten your sac...

Something I forget to mention. If you intend to use Stepcrafts WINPC-NC witch is included (the starter version), then I suggest to upgrade it to th...

kari....., A proxxon will do the job only your feed-rate and cutting depth are less than when you use a Kress or HF 500, so it takes a little longe...

Hi Karib..... look at SOROTEC.DE they sell a lot different tools for CNC and well in price and if you want to try and think to break a lot of end-...

Hi Eric, I have no problems at all with tool changing on parking position. But I think you have a parameter not checked. On tab Special check t...

Hi Eric, I have no problems at all with tool changing on parking position. But I think you have a parameter not checked. On tab Special check t...

Hello Monty, What type of post processor did you use (.nc) or other? This looks like the G-code has a wrong Z-direction you can change (check) thi...

SjorZZZie I made a box with Vectrix using the dovetail gadget and a piece of building foam. now I can pick my bits whenever I need them without sp...

Hello Steve, it is very hard to tell what is possibly wrong if you not tell us more about your setup. you have installed the 4th axis control un...

Thanks, Now I'am certain. Oh and for the users of Vectric Aspire or Vcarve that program has a Gadget included for Drag Knife;)

If you look at "Inkscape" a vector drawing progam witch has an "Laser tool plug-in". With that you can create the necessary code for the Stepcraft an...