Bubbatt, Idiot idea but have you checked your switch with a multimeter if its working? When I see you video there is no reaction by the switch.

Bubbat, Hooking up your tool lenght sensor in WinPC-NC USB step by step. First things first connect the two wires on the mainboard of the Stepcraf...

MMorao, I use the same Chinese cyclone as you ordered and I am satisfied. for bin I used an old dry/wet vacuum cleaner bin from LIDL. Made a lid f...

A clockwork orange machine and I...... love it. I am reading this thread and find it surprising how many problems you guys encountered building thi...

Hello Alexxfx, There's nothing wrong in Aspire, your problem lays in WinPc-NC. I suggest uyou check te folliwing settings in Winpc. In...

Sonkinas, great you found the shaded coloring in WinPC. You can see the G-code when pressing F7 and it size is your saved toolpath file. If you...

Witch pro processor did you use in Aspire? Witch settings, mill for rough and mill for fine did you used? How large is the G-code File?

Jerne.., Try Fusion 360. It is free for home users and has a CAM future. Another rather expensive package is VCarve or Aspire from Vectrix. (maybe...

Hello Kari..., first of all you shout connect the usb cable and power on your steppie before you start up winpc-nc, else you won't get connected. ...

I see it now. This is another example of copy paste direct from the stepcraft site. of-course this shout be in mm. Another flaw on the website of s...

Gruvin, I have still a stylist model of a S420/1 machine in SketschUp available, you can scale that to the S600 dimensions. I made my enclosure ou...

Use this information from Stepcraft. Dimensions of the respective enclosure (L x B x H): 300: 618 x 452 x 624 cm 420: 738 x 542 x 694 cm 600: 9...

Hello Bart, You can convert 2/2,5 D to 3D model. to achieve this draw your desired shape as usual, then you select the modeling tab. Select the fi...

Spil, The diameter of your milling bit could be your problem. Normaly you roughen first the 3D work-piece with a lager diameter tool. I use a 3mm ...

Hello spil, Can you tell something about your 3D software, what program produces your toolpath (pre-processor)? I use Aspire a Vectrix software an...