A suddenly upcoming noise is always a terrifying experience. But you ask a question without giving us some information about the job you executing....

maybe not the right topic but I was reading this and will share my solution. I made a enclosure for my S420m from MDF. Sorry I can...

Yes there is an other way, first witch program do you use for controlling your CNC Winpc or Uccnc. Second after every toolchange you have to use t...

Richard, If the Z and X axis move smooth after an emergency stop it looks more like a software problem rather than a hardware issue. But checking t...

Ok, But as always its better to be safe than sorry 🙂 good luck

make sure you use locktite nr 243 the blue one and not the red variant. Blue will come lose after some torgue, red will stay fixed.

MMorao, If I am correct microsoft lets you download XP for free. ther are plenty of sites with the download link good luck

don't use Vista its the biggest misstake from Microsoft. Try a version of XP or newer that will work well. I use a dedicated PC with windows 7 no ...

What kind of shaft diameter do you want to use? in europe look at Sorotec.de or in Engeland at euroarctrade.co.uk

Thanks, Clear answer:)

try checking the g-code if there is a missing commandline for Z-axis height. I see you use Aspire did the simulation work correct?

Fortunately there are no Wolfs in our country anymore. And it is easy to disassemble when you have to move 🙂

Huff, Your DXF is as good as any other DXF file. I have loaded it in Aspire and see that you are making a thinking mistake. Your two halves are i...