Drilldevil, Thank you very much for the help. I swapped the original usb board back in and WINPCNC is functioning as designed. Many thanks, G...

Yes I did change the USB board since a new one came with the control board rather than swap in the old one. Are you saying that if I swap the old one ...

I checked the wiring and all connections are tight. I then swapped the stepping motor connections for the Y and the Z axis. After doing so, the Z ...

Thanks for the feedback. I thought at first that it might be a mechanical problem but it shifts the reference position in both the x or y or z directi...

I think I figured the problem out. I had scaled the model by 0.5 in x, y, and z to reduce its print size. It seems that this doesn't also reduce the f...

Trying to use my recently built SC600 to 3D print. The problem I am having is that the material (PLA) seems to be feeding too quickly and interfering ...