Hi. I used a 30 degree V-Bit for the text and then filled with acrylic paint and sanded off the excess.

Agree with Rory. I was having the same problem. Tuned the Z axis as per the video and it's worked perfectly ever since.

Hi jvalencia I used 3mm gold mirrored acrylic - A5 sheets cost around £1. I engraved the back (in reverse) and back filled with coloured acrylic p...

Hi For fine separating lines you could use a V Bit - with a 20 degree V bit you can achieve very fine lines.

Hi AVacaru It also depends on what you are cutting - for instance engraving on acrylic or cutting balsa wood is much quieter than cutting hardwood....

Hi jvalencia - I don't have a video of the process - sorry. The process is pretty straight forward: Firstly make sure your machine bed is totall...