Hello Rob, Welcome to the forum, I also have the 600, also from StoneyCNC and am on the edge of London so nice to be in contact with another UK use...

Hi, This is a link to Stepcraft USA Youtube pages, which shows step by step the set up for the sensor. Also all the information is on their websit...

Hi, have you looked at the file to see if the two settings have actually been changed, when I set my 2-600 up i followed the instructions and altered ...

The information for setting up the sensor is on the FAQ page of Stepcraft USA website, sorry not able to give links, but it has all the M31 info to ch...

Really great work, nice to see what can be done with the Steppy.

Doug, Mmorao wants the system ON the 4th axis, and what you show do not have both jaws moving, they need to close from each side, so when they touch t...

Hi Doug, 6082 T6 is available in UK, check Ebay, I have purchased sheets of different thickness's starting at 1.5 mm going upwards. The normal alu...

Hi, problem possibly due to one or more of the micro switches pressed, turn off stepcraft (so stepper motors not active) manually turn spindles to ...

Regarding the X axis, it could be the connector between the motor and spindle (Part 58) being fractionally to long, to check try loosening slightly th...

I personally do not have any laser experiance, but a commercial company I use for acid etching has laser units (3) but not designed for cutting metal,...

Hi, I had the same problem (am a new user). I think your soft limits problem is probably because you had not gone to 'Home All', before you star...

Hi, Thought I would post the settings, there were two toolpaths, this one for the main cut out the other being for the holes,(which was run first) ...

Hi, Below is a link to a video Stoney CNC have for using the soft limits. (in their supplied info on the flash drive it is STEP 3B) As you see, ...