Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Software
2
Beiträge
2
Benutzer
0
Likes
4,020
Ansichten
Themenstarter
Hi,
i'm still a newbie, but i'm making progression, if it wasn't for this hatefully fact that all of a sudden, the zero point of my 'masterpiece' is changed by the stepcraft or the UCCNC software.
Here's a Porsche woodcarving that i was making for a couple of hours and then suddenly, at 1/4 of the end, the zero point is changed by some 20 mm.
i noticed that the speed by which the x-axis is travelling changes too during this moments, resulting in breaking the mills.
It has nothing to do with grouped or combined toolpaths, since only 1 toolpath is made in Aspire and exported as a Mach 3 file.
Who can help me with this horrific error, which ruins all of my workpieces.
Stepcraft 840/2
UCcnc 100
Parallel port
Kress FME-Q 800w - Dremel 300
Aspire 8.5 software
From Belgium
supplier : Sorotec Germany
Veröffentlicht : 30/05/2017 10:04 pm
Lost steps for sure - due to mechanical issues.
Veröffentlicht : 05/06/2017 4:21 pm
