Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Software
6
Beiträge
3
Benutzer
0
Likes
4,420
Ansichten
Themenstarter
Hi
It seems that I make a project to be centred in Cut2D and then when I import the file into UCCNC it is not centered. What am I doing wrong. Attached is screenshots of what it looks like. Project size is 200mmX200mm
Veröffentlicht : 10/04/2017 7:48 pm
Can you show a picture of Cut2D in drawing mode without toolpath?
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 10/04/2017 8:27 pm
Themenstarter
hope this is what you want
Veröffentlicht : 11/04/2017 6:18 pm
Hello trufi,
at first site there is nothing wrong in the Cut2D drawing.
But I suggest to draw a rectangular on the outline of your sketch size 200x200. This will force to set the zero origin in the down left corner. Make for this square a toolpath with a different tool number.
and save both toolpaths in one file.
Set in uccnc the option tool change on (or how that works, I don't know the uccnc program).
Now only let the first toolpath do his work and abort the program at the tool change moment.
hope this will work for you
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 11/04/2017 9:49 pm
I believe that the border that you see in UCCNC is your softlimits. Unless you're softlimits for the X and Y axis are both set to 0 min, 200 max, it will not look the same.
As long as your XY zero point is set correctly in UCCNC, the part will be correct.
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Veröffentlicht : 12/04/2017 4:15 am
Themenstarter
Thanks Guys. It is working perfectly
Veröffentlicht : 12/05/2017 6:17 pm
