Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Software
2
Beiträge
2
Benutzer
0
Likes
4,706
Ansichten
Themenstarter
Hi everyone. Could someone let me know how I can flip the z axis on UCCNC? The image below shows what I currently have. As you can see the spindle is shown on the right side of the diagram (That is the underside of the workpiece). How can I switch it on UCCNC so that the spindle is on the other side (over the workpiece and not under). On the CAM software everything looks good with all axis on the right place but not on UCCNC. Any help would be greatly appreciated.
Veröffentlicht : 02/10/2016 7:17 pm
Click on one of the little green sided boxes at the left of the "screen" - they let you see your project from different sides or from the top.
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Veröffentlicht : 03/10/2016 1:22 am
