Notifications
Clear all
Software
3
Posts
2
Users
0
Reactions
4,826
Views
Topic starter
Hello all,
My configuration:
Stepcraft 2/240
Stepcraft HF-500 spindle
Stepcraft Tool changer
Stepcraft Tool hight sensor
Software UCCNC
I have the software installed with the Stepcraft multi installer.
Everythings works well.
Only the speed off the HF-500 spindle is max 50%
Can someone help me with the parameters of the pwm signal.
I have sent a screenshot of the parameters
Thanks in advance
Posted : 31/08/2017 11:52 pm
Using the stepcraft 600 UCCNC profile (likely very similar to the generic stepcraft 240 UCCNC profile that may have come with your machine, depending on where you bought it), I have a slightly different spindle setup screen.
I've attached it below.
I have the stepcraft 2 600 with the HF 500 spindle, and have no problems getting up to full speed.
Posted : 20/10/2017 4:23 am
(I'm using UCCNC 1.2037, firmware 3.0110, hardware 2.0000)
And from the stepcraft2_model600.pro file, here's the relevant section with the spindle settings:
[Spindlesetupsettings]
IsSpindleinPWMMode=True
SpindlePWMoutpin=17
SpindlePWMoutpinnegate=False
SpindlePWMdirpin=0
SpindlePWMdirpinnegate=False
SpindlePWMfrequency=900
SpindlePWMminpercent=12
SpindlePWMmaxpercent=100
Spindlesteppin=0
Spindlesteppinnegate=False
Spindledirpin=0
Spindledirpinnegate=False
Spindlestepsperunit=500
Spindleacceleration=200
Spindleminvelocity=2000
Spindlemaxvelocity=20000
Spindlerelaysenabled=True
M3relaypin=1
M3relaypinnegate=False
M4relaypin=0
M4relaypinnegate=False
M3ondelay=1000
M3offdelay=1000
M4ondelay=1000
M4offdelay=1000
Floodmistrelaysenabled=True
M7relaypin=0
M7relaypinnegate=False
M8relaypin=0
M8relaypinnegate=False
M7ondelay=1000
M8ondelay=1000
M9delay=0
SpindlePWMoutport=1
SpindlePWMdirport=0
Spindlestepport=0
Spindledirport=0
M3relayport=1
M4relayport=0
M7relayport=0
M8relayport=0
EncoderApin=0
EncoderAport=0
EncoderBpin=0
EncoderBport=0
Encoderreversedirection=False
EncoderPPR=220
Pulleyratio1=1
Pulleyminvel1=1
Pulleymaxvel1=1
Pulleyinuse=1
Pulleyratio2=1
Pulleyminvel2=1
Pulleymaxvel2=1
Pulleyratio3=1
Pulleyminvel3=1
Pulleymaxvel3=1
Pulleyratio4=1
Pulleyminvel4=1
Pulleymaxvel4=1
Pulleyratio5=1
Pulleyminvel5=1
Pulleymaxvel5=1
Pulleyratio6=1
Pulleyminvel6=1
Pulleymaxvel6=1
Pulleyratio7=1
Pulleyminvel7=1
Pulleymaxvel7=1
Pulleyratio8=1
Pulleyminvel8=1
Pulleymaxvel8=1
Pulleyratio9=1
Pulleyminvel9=1
Pulleymaxvel9=1
Pulleyratio10=1
Pulleyminvel10=1
Pulleymaxvel10=1
Pulleyratio11=1
Pulleyminvel11=1
Pulleymaxvel11=1
Pulleyratio12=1
Pulleyminvel12=1
Pulleymaxvel12=1
Pulleyratio13=1
Pulleyminvel13=1
Pulleymaxvel13=1
Pulleyratio14=1
Pulleyminvel14=1
Pulleymaxvel14=1
Pulleyratio15=1
Pulleyminvel15=1
Pulleymaxvel15=1
Usepulleys=False
Posted : 20/10/2017 4:33 am
