Dear user, the forum software has been updated. For the first login please reset your password.
STEPCRAFT-2/420 UCCNC profile
Hello,
I've purchased Stepcraft-2/420 CNC + UC100 dongle separately.
Is there any available UCCNC profile to use with this new version of router ?
Could someone from Stepcraft Systems point me where to find these profiles ?
Thanks a lot
![Meissner Stefan Meissner Stefan](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/sumstefan_26311.jpg)
Hallo,
send a Message to Rory ne will help you.
Gruß
Stefan
SC 420 + Dremel 4000,Proxxon IBS/E mit JR-Kopf, Vakuumtisch: VT3040 CNC-Plus, Kärcher VC6200, Brushless-JR-Spindel im Aubau 😉
Flugmodellbau und alles was mir in den Sinn kommt 🙂
![Frenske Frenske](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Papje_27769.jpg)
Asked here a 1000 times I believe but nobody is willing to post the UCCNC profiles!
Autodesk Inventor 3D / Altium PCB Designer / 3D printing / Winpc-NC / UCCNC / Mach3 / Proxcon IBS/E > Stepcraft 2/600 - Google translate Dutch > German is my best friend
![Michael Loger Michael Loger](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/der_michel_28391.jpg)
Simple reason, the people use Mach3 or WinPC-NC 🙂
And no TopGear, no englisch support 😉
Cheers,
Michel
there are 10 types of people in this world, those who understand binary and those who dont
Stepkraft 2 840++, Kress 1050, Mach 3, Estlcam, Corel Draw, VCarve, PhotoVCarve, Vakuumtisch, Absaugung.
Beruf: Informatiker und IT Security Experte
(++ = Bessere Steuerung, stärkere Stepper)
![Frenske Frenske](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Papje_27769.jpg)
Simple reason, the people use Mach3 or WinPC-NC 🙂
And no TopGear, no englisch support 😉
Cheers,
Michel
Reasonable explanation! :silly:
Autodesk Inventor 3D / Altium PCB Designer / 3D printing / Winpc-NC / UCCNC / Mach3 / Proxcon IBS/E > Stepcraft 2/600 - Google translate Dutch > German is my best friend
Rory from http://stoneycnc.co.uk/ was very helpful and I've received
the missing files - thanks a lot !
I've expected that someone from stepcraft-systems has already prepared all necessary profiles at least
for Mach3 and UCCNC, but unfortunately not.
I plan to create some WIKI pages describing my experience with the machine, from the beginner's point of
view, as I'm just at the start of my CNC journey 😉
Hello,
I'm in the same situation, can't find the Stepcraft 420 profile for UCCNC.
So i'm paging Rory, would you be so kind?
Best regards
Stefan
![J. den Hertog J. den Hertog](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Denus_29435.png)
Asking the same thing: it seems that more and more people are using UCCNC after all.
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
![J. den Hertog J. den Hertog](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Denus_29435.png)
I received an answer from Rory (the very same day) and he sent me the installation files to make my 420 v2 work with UCCNC.
He gave me some support too regarding an issue I've encounter with the first steps (hardware/software limits).
I'm not even a customer of StoneyCNC, so I'm quite amazed!
Thank you very much Rory, much appreciated!! 🙂
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
I'd also like to thank Rory from StoneyCNC for helping me with the UCCNC profiles. He has been remarkably helpful even though I didn't purchase my machine from him, I wish I had.
I wish Stepcraft would take an example from him and improve their support.
John
Hi everybody,
I recently purchased a stepcraft 2 420, UCCNC and the UC100 module.
However I need the profile file for the UCCNC.
I would be most grateful if someone could help.
Many thanks.
Percy
Your best bet is to contact Rory at StoneyCNC.
He offers exemplary customer service, irrespective of who supplied the machine.
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
I confirm Rory from http://stoneycnc.co.uk/ was super.
I have a 420 v1 and missed profile xml and Rory was very kind to give me the file.
![Hartmut Hartmut](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/DocBrown_30822.jpg)
Here's my original 2/420 Profile attached. I think, the M31 Macro will not work correctly.
If anyone needs a working one please post. I've also a modified 2/420 profile which I'm working with. It has enabled M6, MPG, spindle PWM, running M31 Macro and reduced velocity and homing speed for all axix since I'm using a heavy China spindle 0,8kW. Please give me 1-2 days since this profile is on an other PC.
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
-----------------------------------
DK5LH/G11
Thanks for Rory @stoneycnc for providing the profile file. I'll check their store next time I need stuff for my machine. 🙂
- 44 Foren
- 7,658 Themen
- 63.6 K Beiträge
- 78 Online
- 26.5 K Mitglieder