Benachrichtigungen
Alles löschen
Show us your Stepcraft Creations
6
Beiträge
3
Benutzer
0
Reactions
4,341
Ansichten
Themenstarter
Stepcraft 420
Proxxon IBS/E spindle
2 mm two fluted slot drill
12000 rpm
300 mm/min feed
100 mm/min plunge
Cut depth 0.7 mm
Material type = Poplar plywood 3 mm thick
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 20/09/2014 5:30 pm
Nice! Thanks for sharing with us! 🙂
It's not only about tools it's also about skills! 😉
Veröffentlicht : 20/09/2014 9:49 pm
Themenstarter
Cheers Worldhusky,
Like to share
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 20/09/2014 10:11 pm
Super! Looks great. Nice use of staggered clamping too !!
Veröffentlicht : 21/09/2014 2:22 am
Themenstarter
On the previous shapes I had milled the small holes which are 3 mm with a 3 mm cutter in one go then changed over to a 2 mm cutter to mill the inner shape followed by the outer circles row by row.
But on this occasion I stuck with the 2 mm cutter and milled the smaller 3 mm holes in one go
followed by the inner shapes then outer circles row by row.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Veröffentlicht : 21/09/2014 3:25 am
Anything to avoid tool changes! We don't like tool changes!!
Veröffentlicht : 22/09/2014 11:47 pm
