file Frage Requesting plans for bartop arcade cabinet

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
08 Okt 2015 00:14 #25684 von Denus
I'm looking for CNC files of a bartop arcade cabinet, such as the famous Nintendo (Donkey Kong / Popeye version).
But everything else related with arcade cabinets and CNC is welcome!

I want to create a mini version of it, intended for a Raspberry Pi 2.

If someone can, and is willing to help me out, thanks in advance!

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
09 Okt 2015 04:43 #25711 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet
Hi,

nothing useful on the web?

Google search: bartop arcade cabinet dxf cnc

It's not only about tools it's also about skills! ;)
Folgende Benutzer bedankten sich: Denus

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
09 Okt 2015 09:26 #25712 von Denus
Nothing I can use.

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
09 Okt 2015 10:25 - 09 Okt 2015 10:25 #25713 von Denus
I'm looking for useable cnc plans for a Nintendo bartop cabinet similar to this one:

Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.



Then I will have to reduce the scale (2:1) to make a tiny version of it.
I'm even willing to pay for it, but I didn't found anything useable (I'm looking for it since several days now).

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Letzte Änderung: 09 Okt 2015 10:25 von Denus.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
09 Okt 2015 14:27 - 09 Okt 2015 14:27 #25719 von jvalencia
Letzte Änderung: 09 Okt 2015 14:27 von jvalencia.
Folgende Benutzer bedankten sich: Denus

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
09 Okt 2015 14:38 #25720 von Denus
Thanks for the help, but again, this is not what I'm looking for.
There're enough plans for standard bartop cabinets (and I made a few of them too already) but I need plans for a Nintendo bartop.
And that one is not available it seems.

I'm trying to make my own plans now, but it's quite difficult to make every part fit correctly.

This is exactly what I need (and the plans must be useable, no hand-drawings):

Nintendo Bartop Cabinet

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
09 Okt 2015 21:45 #25738 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet

Denus schrieb: I'm trying to make my own plans now, but it's quite difficult to make every part fit correctly.

That isn't THAT difficult! ;)

Do you need only the cabinet body? Do you have rough total measurements? What's about the inside construction? Any ideas how it could be designed?
Which material will be used for the project (just the thickness is important)?
Mills (diameters)?

What's about the graphics on the outside of the cabinet? A cnc job too?

It's not only about tools it's also about skills! ;)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
09 Okt 2015 23:32 #25739 von Denus
Well, it's doable I admit, but the auto cad (compatible) software is not always that easy.

I want a mini version of the cabinet, say approx 36cm high, 26 large and 24 cm deep so I can make the parts with my 420/2.
The material: 8.3 mm MDF.

For the inside construction, I think four slats at every corner will be enough to fortify the cabinet which will be glued together.
Of course, only the rear panel must be removable. But these details can be realised afterwards.

And I only need the cabinet panels, without engravings.

I've started with the side and the speaker panel, but didn't came further...




Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
10 Okt 2015 10:18 - 10 Okt 2015 10:31 #25743 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet

Denus schrieb: I've started with the side and the speaker panel, but didn't came further...


We are talking about something like this?



I tried to stay closer to the pic (the link to Nintendo Bartop Cabinet) ... :whistle:

It's not only about tools it's also about skills! ;)

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Letzte Änderung: 10 Okt 2015 10:31 von Worldhusky.
Folgende Benutzer bedankten sich: Denus

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
10 Okt 2015 11:12 #25747 von Denus
Wow, this is awesome! :woohoo:

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
10 Okt 2015 17:48 - 10 Okt 2015 17:50 #25768 von Denus
And this is the way the other panels (bottom, upper, back etc) have to be installed:
It's almost like your example.

The monitor bezel should be moved to the back a little, to keep some space for the control panel, but that's finetuning...


Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Letzte Änderung: 10 Okt 2015 17:50 von Denus.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
10 Okt 2015 22:11 #25776 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet
Better? B)





How do you like to attach the boards?
Box joints (visible from the outside of the cabinet) or glued into a 3 mm(?) deep slot (invisible from the outside),

What is the diameter of the cutter which will be used to cut the Box Joints or slots?

Backdoor access: Is my realization practical or not for your purpose?

It's not only about tools it's also about skills! ;)

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Folgende Benutzer bedankten sich: Denus

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
10 Okt 2015 23:38 #25779 von Denus
Nice work!

I would prefer to have slots inside, so all the parts (except for the side panels) must have an additional 6mm length.
The backdoor access is just fine, and very nicely made.

The largest cutter I have is 3mm. I'm working a lot with 2mm, but for this job, a 3mm is minimal I guess.

And yes: this is really very nice!

The only thing I'm looking at right now is the control panel: it seems to be a little short in depth.
So I'll have to pull the bezel to the back a little bit and make the control panel larger.

Anyway: thanks a lot for your help so far, I really appreciate it.

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Folgende Benutzer bedankten sich: Worldhusky

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
11 Okt 2015 00:52 #25780 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet

Denus schrieb: I would prefer to have slots inside, so all the parts (except for the side panels) must have an additional 6mm length.


Nice - I would second that too.

Denus schrieb: The only thing I'm looking at right now is the control panel: it seems to be a little short in depth.
So I'll have to pull the bezel to the back a little bit and make the control panel larger.


I don't have the measurements for the brezel - what means I'm just guessing ....

How about to make the brezel negative in the angle - think about it! And I have the feeling it is also done on the original cabinet .... (?)

This Screen-shot will show you the current measurements (left side) of the control panel - and yes, it's tight. How much do you need?

The right version could be realized with a negative brezel ...



It's not only about tools it's also about skills! ;)

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
11 Okt 2015 01:30 #25781 von Denus
Yes, that's much better: 10cm is enough to install the joystick and buttons.
There's room to play a little with the inclination of the bezel, as it hasn't to start from the very edge at the upper side.
So even straight, that's ok, and even better I think.
There's one thing, I'm afraid there's not enough room underneath the control panel to install the hardware.

I've tried to change the construction a bit (hand-drawing just to show you) , but it doesn't change much.





I tried to go on with my own plans in Coreldraw, but I don't know yet if I will keep the emplacement for the marquee...


Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
11 Okt 2015 09:50 - 11 Okt 2015 09:51 #25783 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet

Denus schrieb: There's one thing, I'm afraid there's not enough room underneath the control panel to install the hardware.

How much room do you need? You've any dim specs for the hardware available?

This is what we have right now ...




I have no idea how good your Workshop equipment is (not everything needs to be done by a cnc ;) ) - but would it make sense to miter cut three boards e.g. on a table saw / router to get more room for the hardware?



If neither works we have to think about to steal room from the brezel area or the total height of the cabinet needs to be adjusted ...


Question to the slots for the boards: Right now we have around 3 mm distance to the edge of the side panels. Is that a save game or is that to close to the edge and it could break?

Slot tolerance: I would add 0.1 mm in total to the slot width. Is that enough for an easy assembling with glue?

Whats about T-Molding etc.? Any need to consider something like that in the drawing?

It's not only about tools it's also about skills! ;)

Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.

Letzte Änderung: 11 Okt 2015 09:51 von Worldhusky.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
11 Okt 2015 13:02 #25788 von Denus
I think the best way is to adjust the height of the lower part: instead of 33 / 16, we should try to get 40 / 25 instead.
That would change the shape a bit, but that's not an issue. Check my own plan (which is on scale) for the example.

The joystick needs minimal 40mm: it may fit on the actual control panel, but it's quite short.

For me, one important detail is the speaker panel. I want to recreate the speaker slots like as on the original cabinet.
So the speaker panel must stay large enough (and that gives us the required space for the hardware too).
I also would like to have the speaker panel covering the joint under it, see pic.




The slots will not break: when the MDF is glued with Bizon wood-glue, it will not move a bit. The slots are merely there for a neat and easy assembly.
As for the t-moulding, I don't think I will find something for 8.3mm panels, so that's not an option unfortunately.

I have some more powertools, but I'm trying to have this done with the SC420/2 and nothing else. My experience with other power tools is that it often goes wrong, and I don't really have a workshop.

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
11 Okt 2015 20:31 - 11 Okt 2015 20:37 #25794 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet

Denus schrieb: I think the best way is to adjust the height of the lower part: instead of 33 / 16, we should try to get 40 / 25 instead.


All right - no problem.




Will this suit your imagination?


Slot tolerance? 8.4 mm for the 8.3 mm MDF board? Or do you prefer to make all necessary adjustments with the CAM Software?

Any additional thoughts on the final design? Now is the right time to do it. ;)


Time to grease your cnc machine .... :woohoo:

It's not only about tools it's also about skills! ;)

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Letzte Änderung: 11 Okt 2015 20:37 von Worldhusky.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
12 Okt 2015 11:07 #25807 von Worldhusky
Worldhusky antwortete auf Requesting plans for bartop arcade cabinet

It's not only about tools it's also about skills! ;)

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Folgende Benutzer bedankten sich: Denus

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

  • Denus
  • Denuss Avatar Autor
  • Offline
  • Forum Nutzer
  • Forum Nutzer
  • Jack of all hobbies, master of none!
Mehr
12 Okt 2015 12:09 #25808 von Denus
That's wonderful!
How can I ever thank you enough!?

Slot tolerance is 8.4 indeed.
I will finish the details such as the position of the joystick and buttons and the monitor bezel (mdd panel behind the plexiglass), no problem!

:woohoo:

Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.