file Frage My support board

Mehr
15 Aug 2015 23:12 #24325 von jvalencia
My support board wurde erstellt von jvalencia
I wanted a better way to support my pieces and made this (ignore the holes):

Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.



Dieses Bild ist für Gäste verborgen.
Bitte anmelden oder registrieren um das Bild zu sehen.



It's a MDF board where I cut some rails forming an "X" so I can catch any piece ranging from 100x100 to 800x600 without problems.

I can post the DXF with machining layers and such. It's for the 840.

Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
Folgende Benutzer bedankten sich: bvps, Mr. B, hale2160, AJuncaoDesign, AlanUK

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Aug 2015 09:40 #24328 von hale2160
hale2160 antwortete auf My support board
Very good! Does it help to stiffen the table?

SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Aug 2015 16:28 #24335 von jvalencia
jvalencia antwortete auf My support board

hale2160 schrieb: Very good! Does it help to stiffen the table?


What do you mean?

Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
16 Aug 2015 23:35 #24344 von hale2160
hale2160 antwortete auf My support board
I get quite a bit of flex in the table towards the end of machine (in the Z) and wondered if fitting a heavier spoil board would help prevent this.

SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
17 Aug 2015 19:48 #24371 von jvalencia
jvalencia antwortete auf My support board

hale2160 schrieb: I get quite a bit of flex in the table towards the end of machine (in the Z) and wondered if fitting a heavier spoil board would help prevent this.


Ah, I've not checked it sorry.

Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
05 Mär 2018 11:39 #53119 von hassage
hassage antwortete auf My support board
Hi,

Really like your idea. Was wondering if you would could share the dxf or vcrave files for it?

Thanks
Hassa

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
09 Aug 2019 20:40 #57175 von mrRuben
mrRuben antwortete auf My support board
@jvalencia I would also love the have the files. this seems like a simple system for the D840. if needed you could still add holes for odd shaped pieces. how thick is the mdf? I bought a 18mm board, but that's a bit thick. I was planning to use the provided clamps to hold it down, but the board is too thick...

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.