- Beiträge: 2
- Dank erhalten: 0
Frage
I Cant understand what is wrong with the SAFE Z
- AIdesign
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
31 Jul 2023 13:34 #63288
von AIdesign
Dieser Beitrag enthält Bilddateien.
I Cant understand what is wrong with the SAFE Z wurde erstellt von AIdesign
Hi
I know it will probably be a basic thing, but my head is already in water!
When executing the job, when changing from one line to start another activates the e-stop!
It's always on the "Z".
You can help me!
I'm using a SETPCRAFT M700 and VCRAVE PRO
I know it will probably be a basic thing, but my head is already in water!
When executing the job, when changing from one line to start another activates the e-stop!
It's always on the "Z".
You can help me!
I'm using a SETPCRAFT M700 and VCRAVE PRO
Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Steinke
-
- Offline
- Moderator
-
Weniger
Mehr
- Beiträge: 4
- Dank erhalten: 0
31 Jul 2023 14:32 #63289
von Steinke
Steinke antwortete auf I Cant understand what is wrong with the SAFE Z
I see the command G00Z15. In line 1620. change this line to a smaller value e.g. 5mm. The Z-axis tries to execute this command and moves up against the limit switch and thus triggers the emergency stop. Your team from Stepcraft. If you have any further questions, please do not hesitate to contact us.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.