Benachrichtigungen
Alles löschen
Operation
2
Beiträge
2
Benutzer
0
Reactions
3,527
Ansichten
Themenstarter
Hi All, I need some guidance
The y axis of my 840 was ‘binding’. I have been in my workshop for over 8 hours trying to fix this. I have followed the tuning video step-by-step and I just cant get the thing to operate as it should as it keeps binding.
The Y axis velocity is 2000 and I am 'jogging' the machine at 60%. The machine travels - then binds - travels - then binds
I have checked:
• the lead screws and they are clean and well greased
• here are no obstructions
• the screws are 'well seated' and there is no backlash
• the belt is fine
Cheers
Rich
Any ideas how this machine can be fixed
Stepcraft 840
Kress Spindle
UCCNC
Vectric Aspire
Veröffentlicht : 10/11/2017 5:36 pm
Hi,
make a quick test: Loosen the Screws of the X-Axis on one side and test again. On mine there is too much color at the area for the bearing of the X Screw
MfG
Roy
SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;
Veröffentlicht : 16/11/2017 5:24 pm
