Benachrichtigungen
Alles löschen
Operation
6
Beiträge
3
Benutzer
0
Reactions
3,616
Ansichten
Themenstarter
Hi,
let's take a semi automatic production line, add SC machine with enclosure in it...what is needed is single button outside enclosure or something similar to run g-code with UCCNC all over again. PC is not an option. So every time same g-code is run.
Any idea can this be done and if, how?
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 16/08/2017 1:50 pm
Hello
This should be possible with a wait for input then jump or a subroutine in g code.
But i did not use it for several jears so dont ask me for Details ...
Bruno
Veröffentlicht : 16/08/2017 2:11 pm
Themenstarter
I think the g-code is not a problem, but the button since pc is not allowed to be used, found this:
http://usbbutton.com
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 16/08/2017 3:00 pm
Hi,
why no PC?
You'd need a stand alone motion controller to achieve this without a PC which will easily cost 10 times more than a suitable PC.
Christian
Veröffentlicht : 16/08/2017 3:22 pm
Themenstarter
Sorry, I meant pc is not allowed for the end user...it can be used normally, but the end user should have only something like one button to operate..
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 16/08/2017 3:27 pm
With input i mean a external switch connected to an input in the Maschine Main board.
In g code you wait for input, then jump to Start.
If ncpc cant... Mach3 can.
Maybe you have to write a New m order...
(I love suomi)
Bruno
Veröffentlicht : 16/08/2017 3:47 pm
