- Beiträge: 24
- Dank erhalten: 8
Frage
RUN Screen refresh?
- badgersurfer
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
13 Aug 2016 12:45 #36601
von badgersurfer
RUN Screen refresh? wurde erstellt von badgersurfer
I have noticed that when I move to different screens in UCCNC i lose the toolpath image screen in the RUN screen. Usually when you minimize and then maximise programs refresh it, but this one doesn't. Other than shutting the program down and restarting has anyone seen a fix for this?
I cannot see anything in Config to address this either.
I cannot see anything in Config to address this either.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Remotruker
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 27
- Dank erhalten: 1
18 Sep 2016 04:04 - 18 Sep 2016 04:05 #37509
von Remotruker
Stepcraft 2 420
500 Watt Spindle
3D Printing System
3d Probe
T-Slot Table
Tooling:
1/8" 60 Deg 4 Flute V Bit
1/8" 4-Flute Square Nose End Mill
1/8" 2 Flute Ball Nose End Mill
1/16" 2 Flute Ball Nose End Mill
UCCNC and VCarve Pro
Total Newbie!
Remotruker antwortete auf RUN Screen refresh?
What version are you running? I had issues with the old version, but the new 1.2 has been great!
Stepcraft 2 420
500 Watt Spindle
3D Printing System
3d Probe
T-Slot Table
Tooling:
1/8" 60 Deg 4 Flute V Bit
1/8" 4-Flute Square Nose End Mill
1/8" 2 Flute Ball Nose End Mill
1/16" 2 Flute Ball Nose End Mill
UCCNC and VCarve Pro
Total Newbie!
Letzte Änderung: 18 Sep 2016 04:05 von Remotruker.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.