Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Introduce Youself
4
Beiträge
3
Benutzer
0
Likes
5,056
Ansichten
Themenstarter
Hi all I am a first timer CNC user so this will be a whole new experience
Couple of questions linger before I fork out a large sum of money.
1 anyone here purchased in Australia from the Aussie supplier.
2 The US site says that the UCCNC software and the connector/plate are now included stndard in the price, is this true for other countries.
( if not is it worth buying up front for the extra few hundred
3. IS the step craft spindle worth it ? ( I have a Dremel 3000)
4. Anything else worth getting at the time.
Tks in advance, have asked the supplier same questions but waiting on reply but find its good ask a forum of users for non sales answers
Many thks Paul V
Veröffentlicht : 28/08/2016 10:29 am
Hi Paul,
Definitely worth going for UCCNC and UC100 interface in my view. Intuitive and easy to learn and can be customised if you so wish.
Big plus with this route is that the control computer is relieved of all the critical timing issues, so a slow low cost desktop / laptop can be used. I bought a s/h Dell D610 running Win XP prof just to operate the Stepcraft, and this has given excellent service with no problems whatsoever running UCCNC.
Because it only runs UCCNC, many of the standard Windows functions are redundant and can be stopped, greatly reducing the chances of software glitches.
There are plenty of really clued up members on this forum, so help is readily available should you need it.
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Veröffentlicht : 28/08/2016 11:52 am
Hi Paul,
Welcome to the forum.
In Germany UCCnC is not standard, here you still get the USB Starter included in the price.
But of course I can't tell you how this is in Australia.
2) The UCCNC works fin, except the CAM part of the software which is a mess in my opinion.
I used EstlCam more or less from the beginning as a CAM Software and in the meantime I replaced UCCNC and the UC100 completely by ESTLCAM and an Arduino Uno as Controller. If you go for this, you can save a lot of money as you just need the parallel version of the Stepcraft. EstlCam just costs 49€. There are a couple of threads here explaining how to connect the Arduino to the parallel port of the Stepcraft. In addition, the support of Christian is excellent.
3) a real spindle is always better than a Dremel or a Proxon. If you have a Dremel You van for Säure Start with it, but I am quite sure you can more or less only mill wood or plastics with a Dremel.
I bought a Kress Spindle together with the machine and I am satisfied so far.
Best regards
Roy
MfG
Roy
SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;
Veröffentlicht : 28/08/2016 12:41 pm
Themenstarter
Tks Roy & Peter
Appreciate the replies.
I was hope not to fork out for the UCCNC but given what I have heard about the default product that comes with it I'll up spec while I can.
Looking to get the 420 for some ship modeling work and to test the water at the local market for wood products.
I understand this is a hobby machine, my wife likes the cutting options and piro capability. Doubt I will ever need 3d printing, but who knows
All I have to do is further convince she who must approve...
Appreciated.
Paul V
Veröffentlicht : 28/08/2016 3:46 pm
