Kress 1050 spindle?
 
Benachrichtigungen
Alles löschen

Kress 1050 spindle?

4 Beiträge
2 Benutzer
0 Reactions
4,821 Ansichten
Markku Lehtola
(@sloworks)
Beiträge: 43
Trusted Member
Themenstarter
 

Hi,

I noticed this (Stepcraft 600) : "Other drilling-/milling spindles up to a power limit of 500 watts can also be used". Is it possible to use something more powerful like Kress 1050?

br
Markku
www.sloworks.fi

br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma

 
Veröffentlicht : 19/05/2014 1:10 pm
(@christian)
Beiträge: 314
Reputable Member
 

Hi, you can use the original Stepcraft HF-350 / 500 Spindle :whistle:

Look here

The Kress 1050 is too big for the "little" Stepcraft Machine :S
You have to modifie some parts...

I advise on the Kress!

Liebe Grüße
Chris

CorelDraw X3 / AutoCAD 2013/2014 -> BoCNC / EstlCAM -> WinPC NC USB -> Stepcraft 420

 
Veröffentlicht : 19/05/2014 1:29 pm
Markku Lehtola
(@sloworks)
Beiträge: 43
Trusted Member
Themenstarter
 

Ok, thanks. How about Kress 530?

br
Markku

br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma

 
Veröffentlicht : 19/05/2014 1:38 pm
(@christian)
Beiträge: 314
Reputable Member
 

It's also too big.

Also the diameter is to big, you have to change some parts before you can use the Kress.

I won't use the Kress, it's not a spindle for our Stepcraft Machine :whistle:

Liebe Grüße
Chris

CorelDraw X3 / AutoCAD 2013/2014 -> BoCNC / EstlCAM -> WinPC NC USB -> Stepcraft 420

 
Veröffentlicht : 19/05/2014 1:46 pm
Teilen: