file Frage LIMITS using the UCNCC software

Mehr
20 Aug 2016 13:19 #36763 von [email protected]
Good day to all, Each and every time I go to my UCCNC software for a project I have to go to the configuration menu and un-select the limits flag to be able to jog in any direction, this is not right I am pretty sure. Anyone have any suggestions, please help

JC

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
20 Aug 2016 14:30 - 20 Aug 2016 14:31 #36769 von DocBrown
DocBrown antwortete auf LIMITS using the UCNCC software
If you change anything in your default machine profile you have to save the new configuration with a new profile file name.
Next time start UCCNC like this:

C:\UCCNC\UCCNC.exe /p Stepcraft2_Model420_abc

where "Stepcraft2_model420_abc" is an example for the new profile name.

Viele Grüße

Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
DK5LH/G11
Letzte Änderung: 20 Aug 2016 14:31 von DocBrown.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
20 Aug 2016 15:16 - 20 Aug 2016 15:16 #36770 von Karoly
Karoly antwortete auf LIMITS using the UCNCC software
I never made a new profile. If I make a change in the settings I simply Apply and Save the settings with the blue buttons and the next run the software remembers my settings.
So I don't think making a new profile to save any settings is neccessary.
Letzte Änderung: 20 Aug 2016 15:16 von Karoly.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
23 Aug 2016 19:45 #36828 von DerRoy
DerRoy antwortete auf LIMITS using the UCNCC software
If I remember right, the standard profiles do have the write protection flag in Windows.
Pls. check this because your changes are not saved.

MfG
Roy

SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
03 Jan 2017 17:18 #41811 von SFDeeJay
SFDeeJay antwortete auf LIMITS using the UCNCC software
DerRoy: You are exactly right, and the first person to call this to our attention. I needlessly posted a long explanation about directory protection, but posted it in the Software section. As comprehensive as UCCNC is, they should address this in a future release (place customized configurations in an unprotected directory).

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2021 STEPCRAFT GmbH & Co. KG