Dear user, the forum software has been updated. For the first login please reset your password.
Feedback from a customer
![Brian Wilson Brian Wilson](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/tugwilson_27806.jpg)
As this section is labelled Feedback and Suggestions I am post this here please move it wrong location.
I have purchased and assembled my 420 CNC machine and all in all not a bad experience, which I must say is down to Rory’s constant attention and help with all sorts of problems I had, most due to my own ignorance. However it is now the end of week one, machine up and running and first projects completed, not bad for an old codger of 74!
I have to say that without the undivided attention of my new friend Rory I would still be struggling with the coding let allow the production.
Anyone thinking of getting into the CNC world could not do better than purchasing one of the Stepcraft from Stoney CNC. An email to [email protected] will put you in touch with the master and from there on it’s plain sailing. Thank you Rory, your help was much appreciated.
Regards Brian (Tug) Wilson
![MACHINE CRAFTED MACHINE CRAFTED](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/Mr.%20B_27499.png)
Hello Tug,
I have to agree with your customer feedback.
Excellent customer care from Rory at www.stoneycnc.co.uk
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
- 44 Foren
- 7,660 Themen
- 63.6 K Beiträge
- 85 Online
- 26.5 K Mitglieder