Benachrichtigungen
Alles löschen
Feedback and Suggestions
5
Beiträge
5
Benutzer
0
Reactions
6,368
Ansichten
Themenstarter
Good day to all, Each and every time I go to my UCCNC software for a project I have to go to the configuration menu and un-select the limits flag to be able to jog in any direction, this is not right I am pretty sure. Anyone have any suggestions, please help
JC
Veröffentlicht : 20/08/2016 2:19 pm
If you change anything in your default machine profile you have to save the new configuration with a new profile file name.
Next time start UCCNC like this:
C:UCCNCUCCNC.exe /p Stepcraft2_Model420_abc
where "Stepcraft2_model420_abc" is an example for the new profile name.
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
-----------------------------------
DK5LH/G11
Veröffentlicht : 20/08/2016 3:30 pm
I never made a new profile. If I make a change in the settings I simply Apply and Save the settings with the blue buttons and the next run the software remembers my settings.
So I don't think making a new profile to save any settings is neccessary.
Veröffentlicht : 20/08/2016 4:16 pm
If I remember right, the standard profiles do have the write protection flag in Windows.
Pls. check this because your changes are not saved.
MfG
Roy
SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;
Veröffentlicht : 23/08/2016 8:45 pm
DerRoy: You are exactly right, and the first person to call this to our attention. I needlessly posted a long explanation about directory protection, but posted it in the Software section. As comprehensive as UCCNC is, they should address this in a future release (place customized configurations in an unprotected directory).
Veröffentlicht : 03/01/2017 6:18 pm
