Frage
HF spindle not working
- sloworks
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
09 Aug 2014 11:57 #7133
von sloworks
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
HF spindle not working wurde erstellt von sloworks
Hi,
any ideas what's wrong, check the video here:
www.sloworks.fi/stepcraft
just beeps for ever and do not spin..
any ideas what's wrong, check the video here:
www.sloworks.fi/stepcraft
just beeps for ever and do not spin..
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- DrillKiller
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 115
- Dank erhalten: 11
09 Aug 2014 12:50 #7134
von DrillKiller
DrillKiller antwortete auf HF spindle not working
Hi,
I had nearly the same problem with my HF...
The brushless-regulator was defect - you need
to return it to Stepcraft, they´ll solve it.
best regards
Robin
I had nearly the same problem with my HF...
The brushless-regulator was defect - you need
to return it to Stepcraft, they´ll solve it.
best regards
Robin
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- sloworks
-
Autor
- Offline
- Forum Nutzer
-
11 Aug 2014 09:02 #7164
von sloworks
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
sloworks antwortete auf HF spindle not working
Getting replacement part which I will change myself to save time. Support works nicely, thanks!
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Bitte Anmelden oder Registrieren um der Konversation beizutreten.