file Frage M 1000 Y axis cannot find Endstops

Mehr
05 Mai 2021 12:06 #61089 von Iperpaolo
M 1000 Y axis cannot find Endstops wurde erstellt von Iperpaolo
Hi, I'm Having a problem with the new M1000, Y2 endstops don't works, but microswitches, wires, connections, are tested and are OK

On one side of Y axis (Y1) everything is ok
but on the other side (Y2) looks like the endstops don't work
I've Tested one by one the microswitches of all axis and all the connection Wires, and they are ok. I've checked by hand all the microswitches on the machine, clicking to check if uccnc diagnostic could recognize the endstops (and all axis were recognized, but not the Y2)

I've found a closed circuit between 2 pin ( the Y2 pins ) on the mini board that go on the main board, attached a picture, I'm not sure if this is ok
In the uccnc diagnostic everything is ok but I have always 2 red dot on I/O monitor : 02 and 06 they are GND and Relais 2, don't know what this means.

Dieser Beitrag enthält einen Bildanhang.
Bitte anmelden (oder registrieren) um ihn zu sehen.

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
07 Sep 2021 13:16 #61404 von bpaulson
bpaulson antwortete auf M 1000 Y axis cannot find Endstops
I had the same thing and do not see an answer - did you solve this?

M700, WinPCNC 3.4, Fusion/Blender/SolidWorks/FreeCAD, Deskproto/Aspire 9 (trying)

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Mehr
07 Sep 2021 13:56 #61406 von Iperpaolo
Iperpaolo antwortete auf M 1000 Y axis cannot find Endstops
If you have already checked all the endstop with a multimeter, check the Mini Card in picture too, it's easy to check if is broken

Bitte Anmelden oder Registrieren um der Konversation beizutreten.

Powered by Kunena Forum

© 2022 STEPCRAFT GmbH & Co. KG

Wir benutzen Cookies

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.