- Beiträge: 1
- Dank erhalten: 0
Frage
M700 Wont Jog
- pilky100
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
04 Nov 2020 16:42 #59763
von pilky100
M700 Wont Jog wurde erstellt von pilky100
Hi All.
Hoping this is a simple question
I recently bought the M700, Assembly went smooth and installed the software
Laptop connects to the machine but he machine wont jog.
I can hear a small click every time I click a direction but no movement.
Tried all axis but no movement on any,
What am I missing?
Thanks
James
Hoping this is a simple question
I recently bought the M700, Assembly went smooth and installed the software
Laptop connects to the machine but he machine wont jog.
I can hear a small click every time I click a direction but no movement.
Tried all axis but no movement on any,
What am I missing?
Thanks
James
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- MikeRD03
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 372
- Dank erhalten: 174
24 Nov 2020 19:07 #59913
von MikeRD03
SC M.500 | 2,2kW Spindel G-Penny | Mach4 über Ethernet Smoothstepper
MikeRD03 antwortete auf M700 Wont Jog
Without further input nobody will be able to help you. Interface? Software? OS?
SC M.500 | 2,2kW Spindel G-Penny | Mach4 über Ethernet Smoothstepper
Bitte Anmelden oder Registrieren um der Konversation beizutreten.