- Beiträge: 2
- Dank erhalten: 0
Frage
lost steps
- Bben
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
22 Feb 2020 20:14 #58293
von Bben
lost steps wurde erstellt von Bben
Can anyone help me. I'm getting a lot of lost steps that happen on different tool-paths with different tools. I can run the same job and first time runs well next time get lost steps and ruins the piece.
I have moved all power supplies etc away and also aligned all axis and still get them.
Any help gratefully accepted
I have moved all power supplies etc away and also aligned all axis and still get them.
Any help gratefully accepted
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Paranoid128
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 33
- Dank erhalten: 4
27 Apr 2020 15:36 #58907
von Paranoid128
Paranoid128 antwortete auf lost steps
What kind of machine do you have? That could be anything. For example software, the speed is too fast or at the machine of the belt.
That could be anything. For example software, the speed is too fast. Or on the machine the belt that is too loose or damaged.
That could be anything. For example software, the speed is too fast. Or on the machine the belt that is too loose or damaged.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.