Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Assembly and Maintenance
5
Beiträge
2
Benutzer
0
Likes
4,537
Ansichten
Themenstarter
Dear all,
After assembly and installation of the machine and software, We have two green led lights running, red one blinking and the last led to the right not turning on at all.
When we run software and press machine initialization an error message appears:
Error - machine not ready!
Before we go back and disassemble whole mill we would like to know what is common procedure when such message appears?
Any suggestions what you would do first?
Thank you!
Veröffentlicht : 23/03/2018 2:12 pm
Themenstarter
I forgot to add that we have stepcraft 420!
Veröffentlicht : 23/03/2018 2:12 pm
Did you perhaps inadvertently press the emergency button? If so, give it a clockwise turn to release it.
Lou
SC 1/420, TurboCAD, CamBam, WinPC-NC USB
Veröffentlicht : 25/03/2018 4:28 pm
Themenstarter
Yes I did!
This solved the problem!
I didn't check this (I thought that I did, but I haven't).
Sorry for posting this basic/simple issue.
Thank you for your help!
Veröffentlicht : 26/03/2018 3:20 am
It's from past experience...
Lou
SC 1/420, TurboCAD, CamBam, WinPC-NC USB
Veröffentlicht : 26/03/2018 3:47 pm
