Benachrichtigungen
Alles löschen
Assembly and Maintenance
2
Beiträge
2
Benutzer
0
Reactions
4,480
Ansichten
Themenstarter
Hi All,
I have just completed my build of an 840. I have a 'left over cable and plug. Please see the attached. Can anyone tell me what this is for. Am I being 'thick' and missed a build step?
I cant find this in the build guide
Please let me know
Cheers
Rich
Stepcraft 840
Kress Spindle
UCCNC
Vectric Aspire
Veröffentlicht : 31/07/2016 1:48 pm
It's a grounding cable. It is needed because sometime due to the rotating spindle static electricity will disturb the machine control board. You will find a installation manaul in the Service / Support / Manuals section of the Stepcraft webpage. The manual is different in the German and English section. Hava a look at the English manual in this screenshot:
Here it is a USB cable but mine is also a 230V plug.
Viele Grüße
Hartmut
V2/420 China 800W wassergekühlt
UCCNC & ARDUINO ESTLCAM Controller
ESTLCAM & QCAD
-----------------------------------
DK5LH/G11
Veröffentlicht : 31/07/2016 3:36 pm
