Dear user, the forum software has been updated. For the first login please reset your password.
Is my Z axis inclined?
![Javier Valencia Rodriguez Javier Valencia Rodriguez](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/jvalencia_29638.jpg)
After surfacing my support board with a 20mm flat bit there are micro-steps all over the surface. Is the Z axis inclined or what's going on?
How do you fix this?
I've heard that it's a good practice to machine both X and Y. This is only the X direction.
Also, as a bonus, my extremelly cheap and ugly dust solution made from a bottle of water:
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
![Hal Eccles Hal Eccles](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/hale2160_28759.jpg)
Not tried it yet but this guy really knows his stuff! https://m.youtube.com/watch?v=uRZDyDy7hKU
I'll be trying this next week - love the dust extractor, my Stepcraft HF extractor keeps blocking.
Hal
SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad
![Javier Valencia Rodriguez Javier Valencia Rodriguez](http://stepcraft-systems.com/wp-content/uploads/wpforo/avatars/jvalencia_29638.jpg)
I did that, a big pocket operation at 0.25mm depth with a 20mm bit like this:
But I suspect my mount is a bit deviated from 90º.
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
- 44 Foren
- 7,670 Themen
- 63.7 K Beiträge
- 0 Online
- 26.5 K Mitglieder