Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Assembly and Maintenance
6
Beiträge
5
Benutzer
0
Likes
5,746
Ansichten
Themenstarter
Setup didn't install drivers but found a forum post to solve it.
Now I get the "Realtime USB Interface" dialog box working. But the WINPC NC Starter window indicates the following on the bottom of the starter window: "online";"0"; "E-Stop"; "1:1".
What is this "E-Stop" symbol all about?
I can't find any reference to it on the CD disk or this forum.
Any clues would be much appreciated.
Michael280415
Veröffentlicht : 14/05/2015 1:01 am
Is the big red e-stop button on your Stepcraft pushed in? Twist to reset and see if it makes a difference.
Donald
Learning from mistakes until I become an expert!
Veröffentlicht : 14/05/2015 1:09 am
E-Stop = Emergency Stop, Push Button Switch
It's not only about tools it's also about skills! 😉
Veröffentlicht : 14/05/2015 1:40 am
Themenstarter
Thank you very much -that solved it.
Michael280415
Veröffentlicht : 14/05/2015 11:43 am
Same problem here. The thing is that I twisted it but still it keeps saying E-Stop. Restarted WinPCNC several times and powered the Stepcraft on/off as well.
Any clues?
Veröffentlicht : 01/01/2017 3:20 pm
Hi,
problem possibly due to one or more of the micro switches pressed, turn off stepcraft (so stepper motors not active) manually turn spindles to move away from micro switches, turn unit back on, this can happen if the 'soft limits' have been turned off, so the movements can activate the mico switches.
alan
SC600/2, Kress 1050, UCCNC with UC100, Cut2D Pro, TurboCAD and Fusion 360
Veröffentlicht : 01/01/2017 5:26 pm
